TEL: 0771-8672267
Contact us
TEL: 0771-8672267

Stone cleaning and maintenance program!

&Nbsp;   marble, granite surface cleaning and maintenance procedures are as follows:
&Nbsp;   daily cleaning:
&Nbsp;   1, push the dust:
&Nbsp;   (1) push the dust collector dust is dust produced static friction with the ground, thus dust sucked up the purposes of dust.
&Nbsp;   (2) push dust grip arm should be the correct posture in the abdomen, before as far as possible in a straight line, starting from a push dust, back and forth parallel to the reciprocating, dust in the road close to the ground, unable to lift to avoid dust.
&Nbsp;   (3) corner, dust should be 180-degree turn, and keep pushing on.
&Nbsp;   (4) dust accumulated to a certain extent, should be pushed to the side, and removed with the vacuum cleaner.
&Nbsp;   (5) too many dust dust should be replaced, in order to achieve better results push dust.
&Nbsp;   (6) dust push with finished Hou got workshop timely processing clean, push head up hanging put 2, and spray mill (1) on push dust removal not off of wax surface local dirty track and some walking more of ground has wear printing or heel printing of place, spray Shang spray along wax Hou, with single wipe machine added weight right of nylon hundred clean brush disc for spray mill. It can fall off the wax debris inside a scouring brush disc and after the abrasion, will leave on the ground with a thin layer of new wax, play a role in smooth ground.
&Nbsp;   (2) when the abrasive, the operator on the front ground spray wax, and then use the machine, pay attention to adjust nozzle, spray wax should not be too far so that when a machine is grinding to a wax has dried, still need to be careful not to spray on the wall, furniture, General spray away from the wall, furniture 70cm.
&Nbsp;   (3) after the abrasive, when scouring the brush covered with dirt, and should be replaced or flip the brush.
&Nbsp;   (4) abrasive is completed, dust is pushed up by grinding wax chips and dust (5) to rinse the brush in the workplace, if you have heavy soil or brush has hardened, it can be dipped in wax washing in water, wash clean, dry and set aside.
&Nbsp;   cleaning on a regular basis when push dust and abrasive unable to remove dirty and worn so back to smooth conditions, can conduct a thorough cleaning and polishing, surface wash cycle for six months to a year, the extent to which major dirty.
&Nbsp;   1, before cleaning, to withdraw all the objects, ready for ideal cleaning equipment and cleaning agents, and warning lines or erecting warning signs, pedestrian safety reminders.
&Nbsp;   cleaning time after 23 o'clock at night or after midnight, without affecting the customer's activities. Wet weather should not be waxed.
&Nbsp;   2 push the dust, remove the dust on the ground.
&Nbsp;   3, remove the old wax.
&Nbsp;   (1) with a mop up wax water even cloth to wash the floor.
&Nbsp;   (2) washing machine washing, scrubbing should be used quickly after absorbing water machine sucked or mop up wax solution, otherwise the solution will soon be on the ground to dry and remove difficulties and restart as old wax. Thus, if washing large, wax in the subregion.
&Nbsp;   (3) Note that the wax is not excessive use of water or remain for too long, lest their basic damage surface color or solutions penetrate the ground damaged.
&Nbsp;   (4) old wax must completely removal, can used side on with light view of way for, if has spot track, can using points clean way and without again big area to wax, as with wire velvet wipe except corner side Chen wax (5) ground old wax completely removal Hou, usually ground Shang still left has a layer thin of clean agent, to with water repeatedly rinse had clear ground Hou with sucking water machine or MOP sucking water, to for waxing provides real clean of ground.
&Nbsp;   5, waxed, polished marble, granite surface of sealing wax, facial wax should be used by water-based wax.
&Nbsp;   (1) completely to the ground 10 to wax, or blisters appear on the wax seal wax surface gloss good easy to peel.
&Nbsp;   (2) with a clean cotton or special wax tools-fall will be the first layer of wax (wax) evenly to the ground. Actions should be avoided in actions before and after, so as not to wax foam, affect the wax appearance, it is best to use squeeze water, squeezing the wax, wax surface thin and even.
&Nbsp;   (3), dried the surface polishing machine for around 10~30min or so mild Polish, wax surface light solid, its completely dry in about 4hour. Guangzhou external cleaning (4) on the second layer of wax typically has to pay attention to the following items: the first layer of wax completely dry and then on the second floor, or it may make the first layer of wax wear surface color damage, severe hair pastes, foams, the ground into powder.
&Nbsp;   (5) on the third layer of wax polishing wax, such as a second layer of wax to dry (4H) on a thin layer of wax, freshly waxed it is advisable not to trample on the ground, it is best to wait after the last wax 2H, then a layer of wax, polishing the last 4H again.
&Nbsp;   (6) ground after waxing to prevent splashing of water droplets and washed everyday situations can only use solvent-based cleaning agents.
&Nbsp;   (7) upon the completion, for a day or so will remove skid warning reset furniture objects.
&Nbsp;   (8) promptly inspect the cleaner cleaner to spare.

Copyright, All rights reserved  E-mail: